|
|
| 产品展示 >> Castrol Molub-Alloy® 659合成润滑脂 |
|
Castrol Molub-Alloy® 659合成润滑脂详细说明 （浏览1321次）
Castrol Molub-Alloy® 659
Brick Grease
Description
Castrol Molub-Alloy 659 Brick Grease is manufactured from the highest quality components carefully selected for their
compatibility with Castrol Molub-Alloy lubricating solids and their recommended applications.
Metallic lubricating solids of suitable grade are treated to increase their natural positive affinity for metal surfaces and are
completely dispersed to assure effectiveness during the lubricant's full working life.
A physical characteristic of Molub-Alloy 659 Brick Grease is that it is of a stiffer consistency than an NLGI Grade No. 6.
Application
Typical applications are trunnions and open bushings designed to be lubricated by Brick or Block grease.
Molub-Alloy 659 Brick Grease is designed for applications from 30°F to 350°F and is the preferred grease for extremely
wet applications.
Advantages
Reduced friction, most evident under boundary conditions, is directly attributed to the presence of specially
compounded lubricating solids. This benefit is most pronounced where frequent start-up, slow speeds and high
unexpected loads are encountered.
The establishment of a protective layer of Castrol Molub-Alloy solids provides substantial increase in the working life of
both parts and lubricant. This will result in an increased load bearing area that reduces unit pressures, operating
temperatures and wear.
Realistic energy savings are possible through a reduction in peak power demand during cold start-up.
Glazing is minimized with the use of Castrol Molub-Alloy 659 Brick Grease, therefore providing uninterrupted lubrication.
Overall savings are derived from the above and result from less labor and downtime, smoother, more efficient operation
with longer parts life, and extended lubrication cycles.
Characteristics
Unit Test Method Value
Unworked Penetration mm/10 ASTM D217 20-50
Thickener Type - - Lithium
Dropping Point °C/°F ASTM D566 202/395
Viscosity cSt @ 40°C ASTM D445, D2161 600
Flash Point °C/°F ASTM D92 204/400
Lubricating Solids - Grade Classification Multi-Purpose
User advice
Notes
Molub-Alloy 659 Brick Grease is not compatible with sodium based greases.
For specific terms, conditions, warranty and availability, refer to the Castrol Performance Lubricants’ Price List in effect
at time of purchase.
Castrol Molub-Alloy 659
04.14.2005, Version Number 2.0
Molub-Alloy 659 and Castrol are trademarks of Castrol limited, used under licence.
All reasonable care has been taken to ensure that the information contained in this publication is accurate as of the date of printing. However, such
information may, nevertheless, be affected by changes in the blend formulation occurring subsequent to the date of printing. Material Safety Data Sheets
are available for all Castrol Ltd products. The MSDS must be consulted for appropriate information regarding storage, safe handling and disposal of a
product.
Castrol Industrial North America Inc. 150 West Warrenville Road, 605 3E Naperville, IL 60563
Tel: (877) 641 1600 Fax: (877) 648 9801
castrol.com/industrial
 |
|
|