|
|
| 产品展示 >> 道达尔高温氟化物润滑脂TOTAL STATERMIC NR |
|
道达尔高温氟化物润滑脂TOTAL STATERMIC NR详细说明 （浏览1638次）
STATERMIC NR
Grease
Special grease formulated with fluorinated fluid and solid fluorinated telomer for use in
high temperatures and/or where solvent or acid vapours are present.
APPLICATIONS
l STATERMIC NR is used:
- on all bearings and components exposed to solvent or acid vapours, or radiation,
- on all bearings exposed to temperatures reaching 300 °C intermittently and 250 °C
continuously,
- wherever equipment deterioration is observed, resulting in production stoppage and
frequent use of spare parts.
l Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use
a pneumatic pump system or cartridges.
SPECIFICATIONS
l ISO 6743-9 : L-XBGDB-2
l DIN 51502 : KFKP2U-25
ADVANTAGES
Resistant to radiation
Resistant to strong acids
and oxidizing agents
Thermal and chemical
stability
l Chemical stability: STATERMIC NR is very stable when in contact with strong and weak
acids, alcohols, halogens, oxidizing agents. STATERMIC NR can be used with liquid oxygen
and fuming nitric acid.
l Thermal stability: STATERMIC NR is very resistant to heat and oxidation.
Solubility: STATERMIC does not undergo alteration in the presence of polar or non-polar
organic solvents.
Caution: STATERMIC NR is soluble in highly fluorinated fluids .
l Resistance to radiation: owing to its composition, STATERMIC NR demonstrates very good
resistance to radiation. By way of example, in the presence of an “intensity of radiation” of
65,000 RAD/hr., samples subjected to a total dose of 30 MRAD are irradiated in 500 hours.
Gaseous depolymerization then occurs but no goo is formed.
TYPICAL CHARACTERISTICS METHODS UNITS STATERMIC NR
Colour White
Aspect Homogeneous
Drop point ASTM D 566 °C > 300
NLGI grade ASTM D 217/DIN 51818 2
Penetration at 20 °C ASTM D 217 1/10 mm 265 - 295
Fluid separation IP 121
7 days at 40 °C - % losses % masse 3
4 ball machine ASTM D 2596
. welding load daN 800
Base oil viscosity at 40 °C ASTM D 445 mm2/s 375
Operating temperature range °C - 25 to + 250
Above characteristics are mean values given as an information.
 |
|
|
