Mobil SHC Gear 150,220.320,460，680，1000

 美孚齿轮油SHC系列齿轮油

产品描述

美孚齿轮油SHC™系列润滑油是性能卓越的重负荷齿轮油，供所有类型的密封式齿轮装置以及滑动与滚动元件轴承使用。 他们的目的是在设备保护，油品寿命及无故障操作等使客户提高生产力方面提供优质的服务。 这些科学设计的合成润滑油是由具有卓越的抗氧化性能和热性能和优异的低温流动性的合成基础油配制。 固有的高粘度指数和独特的添加剂配方结合，使本系列产品在严苛的高，低温工作条件下表现杰出。 合成基础油的本质，也有助于产品具有优异的低温性能。 它们具有杰出的极压性，并能承受冲击负荷。 合成基础油有导致不符合要求的表面，如齿轮和滚动元件轴承负荷区的流体低摩擦固有的低牵引力特性。 流体摩擦降低，可降低工作温度，提高齿轮的效率。

美孚齿轮油SHC系列涵盖了非常广泛的粘度范围，介于ISO VG 150至6800之间。 因此，他们发现应用在广泛的闭式齿轮的应用，以及滑动与滚动元件轴承使用。 由于具有粘度等级高的，这个家庭能满足的很慢的速度和高负荷/高温工作的齿轮和轴承的润滑需求，它们是理想的，其中常规产品在边界制度的运作情况。 它们可以是其中的润滑剂浴或recirulation系统被用于施加油的情况。

美孚齿轮油SHC系列润滑油是首选产品，为全球范围内基于其广泛的应用范围和精湛的表演在艰难的情况下，许多原始设备制造商和客户。

Mobil SHC™ Gear Series

Gear Oils

Product Description

Mobil SHC™ Gear Series is a line of exceptional performance, synthetic industrial gear oils designed to provide outstanding protection of gears and bearings, extended oil life even under extreme conditions, helping to enable problem-free operation of equipment and increased customer productivity. These scientifically engineered synthetic lubricants are formulated from synthetic base fluids that have exceptional oxidation and thermal properties and excellent low temperature fluidity. The high viscosity index of these oils deliver less change in viscosity with changes in temperature, enabling wider operating temperature range and improved low temperature startup. Mobil SHC Gear Series lubricants contain an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing as well as a high level of resistance against micropitting fatigue. In addition, compared to conventional gear oil chemistries, it offers the potential for improved lubrication of gearbox rolling element bearings. Mobil SHC Gear Series products offer outstanding rust and corrosion protection relative to conventional gear oils, even in the presence of seawater contamination. They show no tendency to plug fine filters even when wet and have excellent compatibility with ferrous and non-ferrous metals even at elevated temperatures. Mobil SHC Gear Series also exhibit outstanding compatibility with elastomers in static seal tests. They have outstanding EP properties that provide protection even under shock load conditions. The synthetic base stocks used in Mobil SHC Gear Series oils have inherently low traction properties that result in low fluid friction in the load zone of non-conforming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating temperatures and can help improve gear efficiency.
Mobil SHC Gear lubricants are recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. They are especially recommended for applications that may be subject to micropitting: especially heavily loaded gearboxes with surface-hardened tooth metallurgies. It may also be used in gear applications where extreme low and/or high temperatures are encountered and applications where corrosion may be severe.

Features and Benefits

Mobil SHC Gear Series lubricants are part of the Mobil SHC line of products that are recognized and appreciated around the world for innovation and outstanding performance. These synthetic products, pioneered by our research scientists, symbolize the continuing commitment to using advanced technology to provide lubricants with excellent balanced performance. A key factor in the development of Mobil SHC Gear Series was the close contacts between our scientists and application specialists with key OEMs to ensure that our product offering would provide exceptional performance with rapidly evolving industrial gear designs and operation. Not least among the benefits shown in work with OEMs is the ability to resist micropitting wear which can occur with some highly loaded, case-hardened gearing applications. This cooperative work also demonstrated the all-round balanced performance benefits for the new Mobil SHC Gear technology, including a wide temperature range of application.
To address the issue of micropitting wear, our product formulation scientists designed a proprietary combination of additives which would resist traditional gear wear mechanisms as well as protecting against micropitting. Mobil SHC Gear products provide exceptional oil life and deposit control and resistance to thermal/oxidative and chemical degradation, as well as the balance of the performance features. The patent-pending combination of synthetic base oils also provides exceptional low temperature fluidity characteristics unmatched by conventional mineral oil gear lubricants and is a key benefit for remote, low ambient temperature applications. The Mobil SHC Gear Series lubricants offer the following potential benefits:

Applications

Application Considerations: While the Mobil SHC Gear Series are compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the Mobil SHC Gear Series, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits.
Mobil SHC Gear Series exceptional performance, synthetic industrial gear oils are designed to provide optimum equipment protection and oil life even under extreme conditions. They are especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments. Typical applications include:

• Modern, highly loaded gearboxes used in the paper, steel, oil, textile, lumber and cement industries where gear protection and optimum oil life are required.
• Plastic extruder gearboxes

Mobil SHC Gear Series ISO VG 150, 220, 320, 460 and 680 are approved under General Electric’s (GE) gear oil specification D50E35 for use in off-highway vehicle motorized wheel gearbox applications.

Specifications and Approvals

Typical Properties