|
|
| 产品展示 >> Castrol Viscogen KLK 28/Castrol Viscogen KLK28 |
|
Castrol Viscogen KLK 28/Castrol Viscogen KLK28详细说明 （浏览1484次）
Castrol Viscogen® KLK 28
Castrol Viscogen KLK 28 is a fully synthetic oil designed for “all loss” lubrication systems at temperatures up to +250°C/+482°F. Viscogen KLK 28 is formulated with additives capable of extreme load-carrying capacity.
Castrol Viscogen KLK 28 provides a transparent lubricating film of neutral odor.
Viscogen KLK 28 base fluids are selected for exceptional adherence to metal surfaces and extraordinary penetrability into tight clearances, insuring that load-bearing contacts are lubricated while resisting drippage and slingoff.
Features
reduced lubricantion rate due to high temperature stability.
no dripping or slingoff at high speeds or high temperatures
excellent corrosion protection
excellent oxidation resistance; no hard carbon buildup
easier and less frequent chain cleaning
compatible and fully miscible with mineral oils
non toxic
Uses
Application
Castrol Viscogen KLK 28 performance is maximized when dilution with other oils is avioded. When changing a system over from other products to Optimol Viscogen KLK 28, consult Technical Service. While Viscogen KLK 28 is fully miscible with mineral oils, their presence will lead to carbon build up. KLK 28 is incompatible with glycol-based synthetics-these must be purged from the lube system prior to changeover. Consult Technical Service for recommendations on how to conduct a change from a glycol based product.
For manual brush, drip, spray or central lubrication systems. Specifically developed for chain systems used in the particle board industry, including MDF and OSB plants.
Castrol Industrial Americas
150 W. Warrenville Road
Naperville, IL 60563
Tel (877) 641 1600
Fax (877) 648 9801
Castrol Viscogen KLK 28 – 16-Feb-04
Page 1 of 2
Castrol Industrial Americas
150 W. Warrenville Road
Naperville, IL 60563
Tel (877) 641 1600
Fax (877) 648 9801
Castrol Viscogen KLK 28 – 16-Feb-04
Page 2 of 2
Product Data
Typical Characteristics
Base Fluid Fully Synthetic
Color Transparent red
Density, DIN 51757, g/cm3
@ 15°C/60°F 0.915
Viscosity, DIN 51562, mm2/s
@40°C 280
@100°C 33.1
Viscosity Index, ISO 2909 160
Neutralization number, DIN 51558
mg KOH/g 1.1
Flash point, ASTM D-92, °F/°C 500/260
Fire point, ASTM D-92, °F/°C 550/288
Pour point, ISO 3016, °C/°F -34/ -29.2
Subject to usual manufacturing tolerances
 |
|
|