|
|
| 产品展示 >> Shell Malleus HDX/Shell Gadus S3 Wirerope T |
|
Shell Malleus HDX/Shell Gadus S3 Wirerope T详细说明 （浏览1635次）
Shell Malleus HDX
Shell Gadus S3 Wirerope T • Heavy Duty Protection
• High Temperature
• Clay Premium Wirerope and Open Gear Grease
Shell Gadus S3 Wirerope T is a full EP lubricant developed for the lubrication and protection of
open gears, wire ropes and sliding sufaces. The grease is based on high viscosity mineral oils,
inorganic soap thickener and carefully selected additives to provide optimum performance
Applications
• Lubrication of open gears, gear racks,
wire ropes and sliding surfaces.
• Open gears in rotating furnaces, crushing-
, dredger, ball-, rod- and autogenous
mills, gear racks in hoisting machinery, etc
Performance Features
• Excellent anti-wear performance: At
working temperatures, speeds and
pressures, Shell Gadus S3 Wirerope T
forms a protective cushion between the
girth gear and pinion teeth
• Superb load carrying capacity:
Contains10% graphite to reduce tooth
contact zone temperatures, reduce gear
surface pitting and alleviate ‘stick-slip’
conditions
• Adhesiveness: Has very good adhesive
properties and is easy to apply on both
dry and wet surfaces.
• Water repellent: Effectively resists water
‘wash-off’.
• Corrosion protection: Protects metal
surfaces from corrosion in hostile
environments such as salt water
conditions. Repels dirt and dust
Health & Safety
Shell Gadus S3 Wirerope T is unlikely to
present any significant health or safety hazard
when properly used in the recommended
application, and good standards of industrial
and personal hygiene are maintained.
After skin contact, wash immediately with
soap and water.
For further guidance on Product Health &
Safety refer to the appropriate Shell Safety
Data Sheet.
Protect the environment
Take used product to an authorised collection
point. Do not discharge into drains, soil or
water.
Advice
Advice on applications not covered in this
leaflet may be obtained from your Shell
Representative Shell Lubricants Page 2 of 2 10/06/2010
Technical Data Sheet
Typical Physical Characteristics
Shell Gadus S3 Wirerope T
Cone Penetration
Worked @ 25°C 0.1mm
(IP 50/ASTM-217)
350
Base Oil, kinematic viscosity
@ 40°C cSt
@ 100°C cSt
(IP 71/ASTM-D445)
2000
50
Water Washout test %
(ASTM D-1264)
5
Four Ball test: Welding load, N 5400
Corrosion properties
SKF Emcor, distillate water
SKF Emcor WWO distillate water
Pass
Pass
Temperature range
(temporary) °C
-10/+150
(200)
These characteristics are typical of current production. Whilst future production will conform to Shell’s
specification variations in these characteristics may occur.
 |
|
|