|
|
| 产品展示 >> Castrol Optileb GT 460/Castrol Optileb GT460 |
|
Castrol Optileb GT 460/Castrol Optileb GT460详细说明 （浏览1448次）
OPTIMOL OPTILEB® GT 150/220/320/460/680
Fully synthetic gear lubricants, physiologically safe, USDA H1 authorized
DESCRIPTION
OPTIMOL OPTILEB® GT are gear oils with USDA H1 authorization, especially developed to meet the
special requirements in the food and beverage industries. They are based on synthetic oils and
contain carefully selected additives to prevent wear, oxidation and corrosion.
OPTIMOL OPTILEB® GT gear oils are in conformity and even exceed the requirements of DIN 51517
part 3 CLP.
APPLICATIONS
• For the special requirements in the food and beverage industries where there may be direct
exposure of the lubricated part to the edible product or its packaging
• For spur, angular and worm gears
• For gear motors of stirring machines, turners, packaging machines etc.
• For chain variators
• For rolling and sliding bearings
• For pumps and closed circulating systems
ADVANTAGES
• OPTITEC® - OPTIMOL technology
• physiologically safe, USDA H1 authorized (*)
• odorless, tasteless and colorless
• high load carrying capacity
• excellent wear, oxidation and corrosion protection
• good water separation ability
• no foam formation
• neutral to nonferrous metals
• excellent viscosity/temperature behavior
• miscible with mineral oil
• disposal like mineral oil
NOTES FOR USE
• Please observe the viscosity specified by the manufacturer.
• Good compatibility with conventional sealing materials.
• As OPTIMOL OPTILEB® GT is miscible with mineral oils no large-scale cleaning and flushing is
necessary during conversion.
(*) OPTIMOL OPTILEB® GT 150 and 320 only contain raw materials which are listed in the Guideline
of Security 21 CFR 178.3570 of the FDA and which are in conformity with USDA H1.
OPTIMOLOPTILEB® GT
Technical data
Unit Value Test method
OPTIMOL OPTILEB® GT - 100 150 220 320 460 680 -
Article no. - 05232 05229 05230 05231 07259 07261 -
Color - light-yellow visual
Base - polyalphaolefin -
ISO viscosity group - 100 150 220 320 460 680 DIN 51519
Density at + 15°C/+ 159°F kg/m³ 850 850 860 860 860 860 DIN 51757
Kin. viscosity at + 40°C/+ 104°F
at + 100°C/+ 212°F mm²/s 101
14.5
149.0
19.4
213
26.3
320.1
34.2
465
45.0
682
56.0 DIN 51562
Viscosity index - 148 149 157 150 151 143 DIN ISO 2909
Pour point °C
°F
- 42
- 43.6
- 42
- 43.6
- 36
- 32.8
- 33
- 27.4
- 27
- 16.6
- 21
- 5.8 DIN ISO 3016
Flash point °C
°F
220
428
236
456.8
210
410
234
453.2
249
480.2
240
464 DIN ISO 2592
Copper corrosion protection - 1a 1a 1a 1a 1a 1a ASTM D-130
Steel corrosion protection - 0 - A 0 - A 0 - A 0 - A 0 - A 0 - A DIN 51355
FZG test (8.3/90)
Damage load stage - > 12 > 12 > 12 > 12 > 12 > 12 DIN 51354
1 mm²/s ^ 1cSt
These technical data are based on average test results. Minor deviations may occur from case to case.
For further product information please contact the Technical Service of Castrol Industrie GmbH.
Above date are based on extensive tests and practical experience. Considering the wide range of application requirements, they cannot, however,
 |
|
|